Jamb 2019 mathematics syllabus 2019/2020 key points

Jamb 2019 mathematics syllabus 2019/2020 key points
Want to Access JAMB 2019 mathematics Syllabus Online? Follow the procedure outlined here to access JAMB Syllabus online.

Jamb Mathematics syllabus 2019, syllabus for mathematics , Jamb syllabus 2019/2020 , mathematics syllabus read more

Mathematics syllabus 2019/2020 Most candidates when they heard about mathematics they usually feel depressed and worried about it while to some they are cool with mathematics. Which ever side you belong am here to give you the updated jamb syllabus for mathematics.
Mathematics is a compulsory subject to most science and social sciences courses such as engineering, business facilities etc. This is because without computation you won’t perform well in those courses.
The most important thing now is how to pass jamb Mathematics because if you fail mathematics it will reduce your overall mark.
Mathematics is not hard as most people made it to look like, just look for a good tutorial center and register believe me you are good to go.
The mathematics syllabus is divided into several sections, each section covers a topic and has several subheadings.
Get GENERAL MATHEMATICS OR MATHEMATICS (CORE) for MAY/JUNE

    jamb mathematics syllabus
    Online JAMB syllabus is the easiest and convenient way to get relevant information regarding each subject Objectives, Topics, Contents, Notes and Recommended Textbooks.

    AIMS OF THE MATHEMATICS SYLLABUS

    • To prepare you for the forth coming jamb exams because we understand that once you covered all that jamb is going to set then you won’t be taken by surprise.
    • To guide you and to show you relevant keypoint to note :we believe that syllabus are like keypoint.
    • To make sure that 250-300 is yours: with well thought out plan and strategy to achieve it success is yours

    .

    EXAMINATION SCHEME

    There will be two papers, Papers 1 and 2, both of which must be taken.

    PAPER 1: will consist of fifty multiple-choice objective questions, drawn from the common areas of the syllabus, to be answered in 1½ hours for 50 marks.

    PAPER 2: will consist of thirteen essay questions in two sections – Sections A and B, to be answered in 2½ hours for 100 marks. Candidates will be required to answer ten questions in all.

    Section A – Will consist of five compulsory questions, elementary in nature carrying a total of 40 marks. The questions will be drawn from the common areas of the syllabus.

    Section B – will consist of eight questions of greater length and difficulty. The questions shall include a maximum of two which shall be drawn from parts of the syllabuses which may not be peculiar to candidates’ home countries. Candidates will be expected to answer five questions for 60marks.

    See detailed Waec Syllabus for general Mathematics.

    The topics, contents and notes are intended to indicate the scope of the questions which will be set. The notes are not to be considered as an exhaustive list of illustrations/limitations.

    A. NUMBER AND NUMERATION

    ( a ) Number bases

    ( i ) conversion of numbers from one base to another

    ( ii ) Basic operations on number bases

    (b) Modular Arithmetic

    (i) Concept of Modulo Arithmetic.

    (ii) Addition, subtraction and multiplication operations in modulo arithmetic.

    (iii) Application to daily life

    ( c ) Fractions, Decimals and Approximations

    (i) Basic operations on fractions and decimals.
    (ii) Approximations and significant figures.

    ( d ) Indices

    ( i ) Laws of indices

    ( ii ) Numbers in standard form ( scientific notation)

    (e) Logarithms

    ( i ) Relationship between indices and logarithms e.g. y = 10k implies log10y = k.
    ( ii ) Basic rules of logarithms e.g.
    log10(pq) = log10p + log10q
    log10(p/q) = log10p – log10q
    log10pn = nlog10p.
    (iii) Use of tables of logarithms and antilogarithms.

    Calculations involving multiplication, division, powers and roots.

    (f) Sequence and Series

    (i) Patterns of sequences.

    (ii) – Arithmetic progression (A.P.)
    – Geometric Progression (G.P.)
    Determine any term of a given sequence. The notation Un = the nth termof a sequence may be used.

    Simple cases only, including word problems. (Include sum for A.P. and exclude sum for G.P).

    ( g ) Sets

    (i) Idea of sets, universal sets, finite and infinite sets, subsets, empty sets and disjoint sets.
    Idea of and notation for union, intersection and complement of sets.

    (ii) Solution of practical problems involving classification using Venn diagrams.
    Notations: { }, , P’( the compliment of P).

    (h) Logical Reasoning

    Simple statements. True and false statements. Negation of statements, implications.
    Use of symbols: use of Venn diagrams.

    (i) Positive and negative integers, rational numbers

    The four basic operations on rational numbers.
    Match rational numbers with points on the number line.

    Notation: Natural numbers (N), Integers ( Z ), Rational numbers ( Q ).

    (j) Surds (Radicals)

    Simplification and rationalization of simple surds.
    Surds of the form , a and a where a is a rational number and b is a positive integer.
    Basic operations on surds (exclude surd of the form ).

    ·* (k) Matrices and Determinants

    ( i ) Identification of order, notation and types of matrices.

    ( ii ) Addition, subtraction, scalar multiplication and multiplication of matrices.

    ( iii ) Determinant of a matrix

    (l) Ratio, Proportions and Rates

    Ratio between two similar quantities.
    Proportion between two or more similar quantities.

    Financial partnerships, rates of work, costs, taxes, foreign exchange, density (e.g. population), mass, distance, time and speed.

    ( m ) Percentages

    Simple interest, commission, discount, depreciation, profit and loss, compound interest, hire purchase and percentage error.

    *(n) Financial Arithmetic

    ( i ) Depreciation/ Amortization.

    ( ii ) Annuities

    (iii ) Capital Market Instruments

    (o) Variation

    Direct, inverse, partial and joint variations.
    Application to simple practical problems.

    B. ALGEBRAIC PROCESSES

    (a) Algebraic expressions

    (i) Formulating algebraic expressions from given situations

    ( ii ) Evaluation of algebraic expressions

    ( b ) Simple operations on algebraic expressions

    ( i ) Expansion

    (ii ) Factorization

    (c) Solution of Linear Equations

    ( i ) Linear equations in one variable

    ( ii ) Simultaneous linear equations in two variables.

    (d) Change of Subject of a Formula/Relation

    ( i ) Change of subject of a formula/relation
    (ii) Substitution.

    (e) Quadratic Equations

    ( i ) Solution of quadratic equations

    (ii) Forming quadratic equation with given roots.

    (iii) Application of solution of quadratic equation in practical problems.

    (f) Graphs of Linear and Quadratic functions.

    (i) Interpretation of graphs, coordinate of points, table of values, drawing quadratic graphs and obtaining roots from graphs.

    ( ii ) Graphical solution of a pair of equations of the form: y = ax2 + bx + c and y = mx + k

    (iii) Drawing tangents to curves to determine the gradient at a given point.

    (g) Linear Inequalities

    (i) Solution of linear inequalities in one variable and representation on the number line.

    *(ii) Graphical solution of linear inequalities in two variables.

    *(iii) Graphical solution of simultaneous linear inequalities in two variables.

    (h) Algebraic Fractions

    Operations on algebraic fractions with:

    ( i ) Monomial denominators

    ( ii ) Binomial denominators

    Simple cases only e.g. + = ( x0, y 0).

    (i) Functions and Relations

    Types of Functions
    One-to-one, one-to-many, many-to-one, many-to-many.
    Functions as a mapping, determination of the rule of a given mapping/function.

    C. MENSURATION

    (a) Lengths and Perimeters

    (i) Use of Pythagoras theorem, *§ªsine and cosine rules to determine lengths and distances.
    (ii) Lengths of arcs of circles, perimeters of sectors and segments.
    (iii) Longitudes and Latitudes.

    (b) Areas

    ( i ) Triangles and special quadrilaterals – rectangles, parallelograms and trapeziums

    (ii) Circles, sectors and segments of circles.

    (iii) Surface areas of cubes, cuboids, cylinder, pyramids, right triangular prisms, cones and spheres.

    Areas of similar figures. Include area of triangle = ½ base x height and ½absinC.
    Areas of compound shapes.
    Relationship between the sector of a circle and the surface area of a cone.

    (c) Volumes

    (i) Volumes of cubes, cuboids, cylinders, cones, right pyramids and spheres.

    ( ii ) Volumes of similar solids

    Include volumes of compound shapes.

    D. PLANE GEOMETRY

    (a) Angles

    (i) Angles at a point add up to 360 degree.
    (ii) Adjacent angles on a straight line are supplementary.
    (iii) Vertically opposite angles are equal.

    (b) Angles and intercepts on parallel lines.

    (i) Alternate angles are equal.
    ( ii )Corresponding angles are equal.
    ( iii )Interior opposite angles are supplementary
    **ª(iv) Intercept theorem.

    (c) Triangles and Polygons.

    (i) The sum of the angles of a triangle is 2 right angles.
    (ii) The exterior angle of a triangle equals the sum of the two interior opposite angles.

    (iii) Congruent triangles.

    ( iv ) Properties of special triangles – Isosceles, equilateral, right-angled, etc

    (v) Properties of special quadrilaterals – parallelogram, rhombus, square, rectangle, trapezium.

    ( vi )Properties of similar triangles.

    ( vii ) The sum of the angles of a polygon

    (viii) Property of exterior angles of a polygon.

    (ix) Parallelograms on the same base and between the same parallels are equal in area.

    ( d ) Circles

    (i) Chords.

    (ii) The angle which an arc of a circle subtends at the centre of the circle is twice that which it subtends at any point on the remaining part of the circumference.

    (iii) Any angle subtended at the circumference by a diameter is a right angle.

    (iv) Angles in the same segment are equal.
    (v) Angles in opposite segments are supplementary.

    ( vi )Perpendicularity of tangent and radius.

    (vii )If a tangent is drawn to a circle and from the point of contact a chord is drawn, each angle which this chord makes with the tangent is equal to the angle in the alternate segment.

    Angles subtended by chords in a circle and at the centre. Perpendicular bisectors of chords.

    ( e) Construction

    ( i ) Bisectors o
    f angles and line segments
    (ii) Line parallel or perpendicular to a given line.
    ( iii )Angles e.g. 90o, 60o, 45o, 30o, and an angle equal to a given angle.
    (iv) Triangles and quadrilaterals from sufficient data.

    (f) Loci

    Knowledge of the loci listed below and their intersections in 2 dimensions.
    (i) Points at a given distance from a given point.
    (ii) Points equidistant from two given points.
    ( iii)Points equidistant from two given straight lines.
    (iv)Points at a given distance from a given straight line.

    E. COORDINATE GEOMETRY OF STRAIGHT LINES

    (i) Concept of the x-y plane.

    (ii) Coordinates of points on the x-y plane.

    F. TRIGONOMETRY

    (a) Sine, Cosine and Tangent of an angle.

    (i) Sine, Cosine and Tangent of acute angles.

    (ii) Use of tables of trigonometric ratios.

    (iii) Trigonometric ratios of 30o, 45o and 60o.

    (iv) Sine, cosine and tangent of angles from 0o to 360o.

    ( v )Graphs of sine and cosine.

    (vi)Graphs of trigonometric ratios.

    (b) Angles of elevation and depression

    (i) Calculating angles of elevation and depression.
    (ii) Application to heights and distances.

    (c) Bearings

    (i) Bearing of one point from another.

    (ii) Calculation of distances and angles

    *G. INTRODUCTORY CALCULUS

    (i) Differentiation of algebraic functions.

    (ii) Integration of simple Algebraic functions.
    Concept/meaning of differentiation/derived function, , relationship between gradient of a curve at a point and the differential coefficient of the equation of the curve at that point. Standard derivatives of some basic function e.g. if y = x2, = 2x. If s = 2t3 + 4, = v = 6t2, where s = distance, t = time and v = velocity. Application to real life situation such as maximum and minimum values, rates of change etc.

    Meaning/ concept of integration, evaluation of simple definite algebraic equations.

    H. STATISTICS AND PROBABILITY

    (a) Statistics

    (i) Frequency distribution

    ( ii ) Pie charts, bar charts, histograms and frequency polygons

    (iii) Mean, median and mode for both discrete and grouped data.

    (iv) Cumulative frequency curve (Ogive).

    (v) Measures of Dispersion: range, semi inter-quartile/inter-quartile range, variance, mean deviation and standard deviation.

    (b) Probability

    (i) Experimental and theoretical probability.

    (ii) Addition of probabilities for mutually exclusive and independent events.

    (iii) Multiplication of probabilities for independent events.

    I. VECTORS AND TRANSFORMATION

    Vectors in a Plane

    Vectors as a directed line segment.

    Cartesian components of a vector

    Magnitude of a vector, equal vectors, addition and subtraction of vectors, zero vector, parallel vectors, multiplication of a vector by scalar.

    Transformation in the Cartesian Plane

    Reflection of points and shapes in the Cartesian Plane.

    Rotation of points and shapes in the Cartesian Plane.

    Translation of points and shapes in the Cartesian Plane.

    Enlargement

     

    UNITS

    Candidates should be familiar with the following units and their symbols.

    ( 1 ) Length
    1000 millimetres (mm) = 100 centimetres (cm) = 1 metre(m).
    1000 metres = 1 kilometre (km)

    ( 2 ) Area
    10,000 square metres (m2) = 1 hectare (ha)

    ( 3 ) Capacity
    1000 cubic centimeters (cm3) = 1 litre (l)

    ( 4 ) Mass
    milligrammes (mg) = 1 gramme (g)
    1000 grammes (g) = 1 kilogramme( kg )
    ogrammes (kg) = 1 tonne.

    ( 5) Currencies
    The Gambia – 100 bututs (b) = 1 Dalasi (D)
    Ghana – 100 Ghana pesewas (Gp) = 1 Ghana Cedi ( GH¢)
    Liberia – 100 cents (c) = 1 Liberian Dollar (LD)
    Nigeria – 100 kobo (k) = 1 Naira (N)
    Sierra Leone – 100 cents (c) = 1 Leone (Le)
    UK – 100 pence (p) = 1 pound (£)
    USA – 100 cents (c) = 1 dollar ($)
    French Speaking territories: 100 centimes (c) = 1 Franc (fr)
    Any other units used will be defined.

    OTHER IMPORTANT INFORMATION

    ( 1) Use of Mathematical and Statistical Tables
    Mathematics and Statistical tables, published or approved by WAEC may be used in the examination room. Where the degree of accuracy is not specified in a question, the degree of accuracy expected will be that obtainable from the mathematical tables.

    Use of calculators
    The use of non-programmable, silent and cordless calculators is allowed. The calculators must, however not have the capability to print out nor to receive or send any information. Phones with or without calculators are not allowed.

    Other Materials Required for the examination
    Candidates should bring rulers, pairs of compasses, protractors, set squares etc required for papers of the subject. They will not be allowed to borrow such instruments and any other material from other candidates in the examination hall.
    Graph papers ruled in 2mm squares will be provided for any paper in which it is required.

    Disclaimer
    In spite of the provisions made in paragraphs 4 (1) and (2) above, it should be noted that some questions may prohibit the use of tables and/or calculators.

Leave a Reply

Your email address will not be published. Required fields are marked *